[#kb0009]
Netplan Configurations
1. Linux Command Line (terminal)
Edit the following file
sudo nano /etc/netplan/00-installer-config.yaml
Use the following structure to static IP
# This is the network config written by 'subiquity'
network:
version: 2
ethernets:
ens18:
dhcp4: no
addresses: [10.10.0.115/24]
gateway4: 10.10.0.1
nameservers:
addresses: [208.67.222.222,10.10.0.1]
Use the following structure to dynamic IP
# This is the network config written by 'subiquity'
network:
version: 2
ethernets:
ens18:
dhcp4: true
Try your configuration with the command:
sudo netplan try
Apply your configuration with the command:
sudo netplan apply
Copyright ∆ SYMCO SYSTEMS